FlexStyle Cassette ST30 DC
Low Voltage Cassette Shade—Low Voltage Motor-24 Volt Wiring
FlexStyle Cassette ST30 DC features a high-end cassette shade equipped with a quiet, low voltage motor that delivers high voltage performance. Shade motor is available in 24V RTS, 24V dry contact, and 24V 485 platform technologies and ships fully assembled for an easy install. The cassette comes with attractive aluminum endcaps and the option of either a square or curved cassette. It is available with or without a bottom return. The bottom return conceals shade fabric and mounting hardware for a clean, finished look. When an open bottom is specified the cassette front can be fabric wrapped.
Product Specs
-
CHILD SAFETY NOTICE: This product complies with ANSI/WCMA A100.1-2022-Child Safety Standard and has been Certified Best for Kids™ by the Window Covering Safety Council.
-
Accommodates a 2-¾” (70 mm) bundle diameter max and up to 8’ (244 cm) width.
-
Available in square or curved cassette.
-
Curved cassette dims: 3-7/8” x 3-7/8” (98 mm x 98 mm).
-
Square cassette dims: 4-3/8 x 3-7/8” (111 mm x 98 mm).
-
Optional light control brush available.
-
Shade motor is available in standard dry contact, radio frequency, and 485 platform technologies. Large projects benefit from the 24V 485 motor’s scalability.
-
Quiet 24V motor that uses 24-volt wiring. Follow low voltage accepted practices for wiring.
-
Transformer needed for plug and play option.
-
Hardware available in black, taupe, grey, white, warm white, and textured bronze.
-
Choose from a wide range of fabric colors, textures, and opacities.
-
Customize with graphics, patterns, or custom color match.
ANSI/WCMA A100.1-2022 Child Safety Standard
Effective June 1, 2024, in compliance with the updated ANSI/WCMA A100.1-2022
child safety standard, all Draper window shades operated by a bead chain will be
furnished with a tensioned hold-down device that is permanently attached and
partially disables the product if not installed correctly. This hold-down should
be installed with tension on the chain.
All bead chain operated window shades will include:
- Permanently installed spring-loaded tensioned hold-down device
- Approved permanent warning label attached
- Approved mechanical fasteners for the tension device included. Screws provided are not suitable for all mounting surfaces. The installer is responsible for secure mounting using
appropriate hardware for the site conditions. Consult with contractors and builders as needed.
If the tension device is not installed with appropriate tension on the bead
chain, the shade will be rendered partially inoperable. If installed
properly, the tension device will prevent the creation of a hazardous loop
and
will maintain tension on the bead chain.
Learn more about the new child safety standard
At the link below, you can see more information about the new child safety
standard, mounting methods for the tensioned hold-down device, alternatives
to bead chain products, and more.
Click here for more information
Supporting Documents
Click the
and
icons to navigate the folders. Click the document name to download.
Part Numbers