Product Specs
-
If this product is installed in a residence or other environment where it's likely that young children will be present, it must comply with ANSI/WCMA A100.1 for safety reasons. Request compliance at the time of the order, and we will supply a pre-installed Spring-Loaded Chain Tension Device. Details here.
-
If this product is installed in a residence or other environment where it's likely that young children will be present, it must comply with ANSI/WCMA A100.1 for safety reasons. Request compliance at the time of the order, and we will supply a pre-installed Spring-Loaded Chain Tension Device. Details here.
-
Available in sizes up to 11’ wide x 11’ high, depending on fabric selection.
-
Available in sizes up to 11’ x 11’ (335 cm x 335 cm), depending on fabric selection.
-
Bead chain clutch operator mounted right- (standard) or left-hand operation.
-
Choose from a wide range of fabric colors, textures, and opacities.
-
Guide wires are optional.
-
Clutch available in white (standard) or black.
-
Stainless steel bead chain (standard). Polyester chain available in white, black, brown, grey, or ivory at no extra charge.
-
Includes mounting brackets (standard) and fascia with endcaps.
-
Universal mounting brackets and spring-loaded idler end provide ease of installation.
-
Hardware finish is textured powder coat available in white, black, ivory, sand, charcoal bronze, or silver (smooth finish). Custom powder coat colors available.
-
Cable guides available for secure operation in wind (secures hem bar only, not fabric).
-
Weighted hem bar to stabilize shade during operation.
-
Porch or patio shades should be retracted in windy conditions.
-
In coastal applications near salt water, some deterioration of the operator and bracket components may occur.
ANSI/WCMA A100.1 Compliance
If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.
If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.
Compliant window shades will include:
- Pre-installed spring-loaded chain tension device with bead chain threaded through it
- Approved permanent warning label attached
- Approved mechanical fasteners for the tension device included
If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.
Testing
The testing required by the WCMA for products to comply with safety standard A100.1 includes:
- UV stability testing - AATCC Test Method 16 for UV Stability
- Impact testing - ASTM D5420
- Bead chain durability testing
- Operation cycle testing - 3,000 cycles per the standard
Draper's spring loaded tension device passed the requirements of these tests.
WCMA compliant hangtag warning label
Part Numbers
Related Motors & Accessories