Based on your detected country, we suggest the draperinc.com domain for the best experience.

US Dollar Exchange Rate is currently 1.33.

FlexShade Angled Coupler

Product Description

FlexShade Angled Coupler allows multiple angled window shades to be driven with a single motor. Reducing the number of motors required simplifies the electrical portion of the project and reduces overall budget costs. Coupled shades must be the same height. Each panel's height can be independently adjusted. It accommodates inside and outside corner angles to 90 degrees. The FlexShade Angled Coupler is easier to order and requires fewer job site visits. Please contact Draper for hardware restrictions.

Patent Information

Hardware Options

Fabric Options

Large Format Printing

Ready to purchase

Product Specs

Compatible with 2” (51 mm) and 3” (76 mm) diameter rollers. Adjacent roller tubes must be the same diameter.

Compatible with 2” and 3” diameter rollers. Adjacent roller tubes must be the same diameter.

Requires fewer job site visits and easy to order. Contact Draper for hardware restrictions.

Installer-friendly brackets can overcome walls that are not perfectly flat. Both standard- and reverse-roll fascia can be used with these brackets as well as surface mount headboxes.

Installer-friendly brackets can overcome walls that are not perfectly flat. Can be used with surface mount headboxes and standard- and reverse-roll fascia.

Easy to order and requires fewer job site visits. Please contact Draper for hardware restrictions.

Coupled shades must be the same height.

Coupled shades must be the same height. Each panel's height can be independently adjusted.

Each panel's height can be independently adjusted.

ANSI/WCMA A100.1 Compliance

If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.

If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.

Compliant window shades will include:

Pre-installed spring-loaded chain tension device with bead chain threaded through it
Approved permanent warning label attached
Approved mechanical fasteners for the tension device included

If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.