FlexStyle Cassette ST30 DC
Product Description
FlexStyle Cassette ST30 DC features a high-end cassette shade equipped with a quiet, low voltage motor. The shade motor is available in 24V RTS, 24V dry contact, and 24V 485 platform technologies. It comes with elegant aluminum endcaps and the choice of either a square or curved profile. Options include a fabric-wrapped front panel (open bottom hardware only) or choose from six stylish finishes. Finished cassettes are available with an open bottom or a bottom return option. The bottom return offers enhanced light control when paired with optional "U" Channels. Cassette ships fully assembled for an easy install.
Product Specs
-
CHILD SAFETY NOTICE: This product complies with ANSI/WCMA A100.1-2022-Child Safety Standard and has been Certified Best for Kids™ by the Window Covering Safety Council.
-
CHILD SAFETY NOTICE: This product complies with ANSI/WCMA A100.1-2022-Child Safety Standard and has been Certified Best for Kids™ by the Window Covering Safety Council.
-
Accommodates a 2-¾” (70 mm) bundle diameter max and up to 8’ (244 cm) width.
-
Available in square or curved cassette.
-
Maximum bundle diameter of 2-3/4".
-
Minimum shade width is 2'.
-
Maximum shade width is 8' or wider depending on fabric choice.
-
Curved cassette dims: 3-7/8” x 3-7/8” (98 mm x 98 mm).
-
Square cassette dims: 4-3/8 x 3-7/8” (111 mm x 98 mm).
-
Available in square or curved cassette.
-
Curved cassette dims: 3-7/8” x 3-7/8”.
-
Optional light control brush available.
-
Shade motor is available in standard dry contact, radio frequency, and 485 platform technologies. Large projects benefit from the 24V 485 motor’s scalability.
-
Square cassette dims: 4-3/8 x 3-7/8”.
-
An optional light control brush is available.
-
Quiet 24V motor that uses 24-volt wiring. Follow low voltage accepted practices for wiring.
-
Choose from a wide range of fabric colors, textures, and opacities.
-
Transformer needed for plug and play option.
-
Customize with graphics, patterns, or custom color match.
-
Hardware available in black, taupe, grey, white, warm white, and textured bronze.
-
Choose from a wide range of fabric colors, textures, and opacities.
-
Customize with graphics, patterns, or custom color match.
ANSI/WCMA A100.1 Compliance
If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.
If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.
Compliant window shades will include:
- Pre-installed spring-loaded chain tension device with bead chain threaded through it
- Approved permanent warning label attached
- Approved mechanical fasteners for the tension device included
If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.
Testing
The testing required by the WCMA for products to comply with safety standard A100.1 includes:
- UV stability testing - AATCC Test Method 16 for UV Stability
- Impact testing - ASTM D5420
- Bead chain durability testing
- Operation cycle testing - 3,000 cycles per the standard
Draper's spring loaded tension device passed the requirements of these tests.
WCMA compliant hangtag warning label
Part Numbers
Related Videos
Related Motors & Accessories