Based on your detected country, we suggest the draperinc.com domain for the best experience.
US Dollar Exchange Rate is currently 1.33.

Closures for Type D Pockets or Wall Clip

Closure Panels

Depending on the existing pocket size, Closures for Type D Pockets or Wall Clip offers three different closure panels for use with Pocket D Headboxes or Wall Clips. Field notching for chain clearance is required on larger closure panels.
 

Product Specs

  • Extrusion comes in 12’ 3" (374 cm) long sections and must be cut to fit the space available. Draper can also cut to size.
  • Wall clips (with or without tile lip) accommodate 1-½” (38 mm), 3” (38 mm), or 5” (127 mm) panels, depending on the size of the pre-existing pocket.
  • 1-½” (38 mm) panel is for a manual FlexShade mounted in a Type D Pocket Headbox. No notching required for chain clearance.
  • 3” (76 mm) panel is for a manual FlexShade mounted in a Type D Pocket Headbox. No notching required for chain clearance.
  • The 5” (127 mm) closure is for use with wall clip only.

ANSI/WCMA A100.1-2022 Child Safety Standard

Effective June 1, 2024, in compliance with the updated ANSI/WCMA A100.1-2022 child safety standard, all Draper window shades operated by a bead chain will be furnished with a tensioned hold-down device that is permanently attached and partially disables the product if not installed correctly. This hold-down should be installed with tension on the chain.

All bead chain operated window shades will include:

  • Permanently installed spring-loaded tensioned hold-down device
  • Approved permanent warning label attached
  • Approved mechanical fasteners for the tension device included. Screws provided are not suitable for all mounting surfaces. The installer is responsible for secure mounting using appropriate hardware for the site conditions. Consult with contractors and builders as needed.

If the tension device is not installed with appropriate tension on the bead chain, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain.

Approved permanent warning label

Learn more about the new child safety standard

At the link below, you can see more information about the new child safety standard, mounting methods for the tensioned hold-down device, alternatives to bead chain products, and more.

Click here for more information
Tensioned hold-down device

Supporting Documents

Click the and icons to navigate the folders. Click the document name to download.

Skip Navigation Links.

Part Numbers

  • C044.209.21 - 1 1/2" Closure Panel
  • C044.210.21 - 3" Closure Panel
  • C044.211.21 - 5" Closure Panel (Wall Clip Only)
  • - Contact Draper for details

Videos

Case Studies

Related Motors & Accessories

Got a question?

We've got answers. Contact us about window shades with the form below and let us know how we can help you deliver on your projects.

Your location:

   

We have automatically detected your location, shown above. If your correct home territory is not shown, please select the correct one so that we may accurately route your question.

What type of installation?


What's your question?

Tell us about yourself.



Your Drape‍r contact information:

Need to contact someone immediately? Your Draper contacts are shown below.

Corey Photo
Corey Smith
Commercial Sales Account Representative - Mid-Atlantic U.S.
[email protected]
267.668.2076
Logo Photo
Architectural Sales Consultant Team
Contact Info:
[email protected]
800-238-7999
Quick Feedback

We would love to get your thoughts so don't hesitate to send us your feedback!

Name
Email
What could we improve? (required)
Please enter the following characters to help us prevent spam:
nothuman