Product Specs
-
Extrusion comes in 12’ 3" (374 cm) long sections and must be cut to fit the space available. Draper can also cut to size.
-
Compatible with 1-1/2” (38 mm), 3” (76 mm), and 5” (127 mm) closures.
-
Tile support lip dimension is 7/8" (22 mm).
ANSI/WCMA A100.1 Compliance
If clutch-operated roller shades are installed in an environment where it's possible
that young children will be present, they should comply with ANSI/WCMA
A100.1, the Standard for Safety of Window Coverings.
If the shades that you purchase need to comply with this standard, it is your
responsibility to inform Draper and opt-in to receive compliant products at time of
order.
Spring-Loaded Cord Tension Device
Compliant window shades will include:
- Pre-installed spring-loaded chain tension device with bead chain threaded
through it
- Approved permanent warning label attached
- Approved mechanical fasteners for the tension device included
If the tension device is not installed properly, or becomes unattached from the
mounting surface, the shade will be rendered partially inoperable. If installed
properly, the tension device will prevent the creation of a hazardous loop and
will maintain tension on the bead chain. The tension device and label require
tools to be removed.
Testing
The testing required by the WCMA for products to comply with safety standard
A100.1 includes:
- UV stability testing - AATCC Test Method 16 for UV Stability
- Impact testing - ASTM D5420
- Bead chain durability testing
- Operation cycle testing - 3,000 cycles per the standard
Our spring loaded tension device passed the requirements of these tests.
WCMA compliant hangtag warning label
Supporting Documents
Click the
and
icons to navigate the folders. Click the document name to download.
Part Numbers
-
C014.066.21 - Wall Clip with Ceiling Tile Lip
-
C044.209.21 - 1 1/2" Closure Panel
-
C044.210.21 - 3" Closure Panel
-
C044.211.21 - 5" Closure Panel
-
- Contact Draper for details
Related Motors & Accessories