Based on your detected country, we suggest the draperinc.com domain for the best experience.
US Dollar Exchange Rate is currently 1.33

FlexShade Coupler

Product Description

Drive multiple window shades with a single motor or crank, the FlexShade Coupler makes it easier than ever to group multiple shades with a single operator. Reducing the number of motors required not only simplifies the electrical portion of the project, but it also reduces overall budget costs. Brackets are installer-friendly and can overcome walls that are not perfectly flat. Coupled shades must be same height and can be independently adjusted easily. Angled couplers available.
 

Product Specs

  • Compatible with 2” (51 mm) and 3” (76 mm) diameter rollers. Adjacent roller tubes must be the same diameter.
  • Brackets extend 2-1/2" (64 mm) from mounting surface to center line of roller, and may be wall- or ceiling-mounted.
  • Coupler system should be installed in an existing pocket or a Type D Pocket. Fascia is available.
  • Coupled units may be installed in 4-5/8” (117 mm) Draper ceiling pockets. Fascia is available.
  • Only motor and crank-operated shades are suitable for coupling. FlexShade 2, Colossal, and LightBloc FlexShade may NOT be coupled!

ANSI/WCMA A100.1 Compliance

If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.

If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.

Compliant window shades will include:

  • Pre-installed spring-loaded chain tension device with bead chain threaded through it
  • Approved permanent warning label attached
  • Approved mechanical fasteners for the tension device included

If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.

Testing

The testing required by the WCMA for products to comply with safety standard A100.1 includes:

  • UV stability testing - AATCC Test Method 16 for UV Stability
  • Impact testing - ASTM D5420
  • Bead chain durability testing
  • Operation cycle testing - 3,000 cycles per the standard

Our spring loaded tension device passed the requirements of these tests.

WCMA compliant hangtag warning label

Supporting Documents

Click the and icons to navigate the folders. Click the document name to download.

Skip Navigation Links.

View More CAD documents

Part Numbers

  • C177.058SA - Straight Line Coupler-Retractable Shaft Assembly for 2" Roller
  • C177.059SA - Straight Line Coupler Height Adjuster Assembly for 2" Roller
  • C254.006 - 2" Spanner Wrench for 2" Height Adjuster
  • C177.061SA - Straight Line Coupler Retractable Shaft Assembly for 3" Roller
  • C177.062SA - Straight Line Coupler Height Adjuster Assembly for 3" Roller
  • C254.007 - 3" Spanner Wrench for 3" Height Adjuster
  • C069.013 - Angled Coupler
  • - Contact Draper for details

Videos

Case Studies

Related Motors & Accessories

Quick Feedback

We would love to get your thoughts so don't hesitate to send us your feedback!

Name
Email
What could we improve? (required)
Please enter the following characters to help us prevent spam:
nothuman